Torqeedo Travel 603 Guía Rápida página 29

Operation
Charging the battery from the onboard power supply
Charge using a DC power supply in the range between 9.5 V and 50 V. The DC
power supply must be able to provide at least 4 A.
Use the Torqeedo 12/24 V charging cable (item number 1128-00) for charging.
7 Removing the drive
In order to remove the drive, perform the action steps from section Chapter 5,
"Start-up" in reverse order.
8 Towing/slipping the boat
A DVIC E
The motor must not be attached to the boat's transom during towing/slipping,
and the boat must not be towed/slipped with the motor in the tilted position.
When the boat is towed/slipped, the motor must always be removed; see Chapter 7,
"Removing the drive".
Comply with the national regulations for towing/slipping boats.
V. 1.0 / English page 29 / 140