Safety Information - Ingersoll Rand PALAIR Manual De Instalación Y Operación

READ THIS MANUAL BEFORE USING THESE PRODUCTS. This
manual contains important safety, installation and operation
information.
This manual provides important information for all personnel involved with the safe installation and operation of these
products. Even if you feel you are familiar with this or similar equipment, you should read this manual before operating
the product.
Danger, Warning, Caution and Notice
Throughout this manual there are steps and procedures which, if not followed, may result in a injury. The following signal
words are used to identify the level of potential hazard.
DANGER
WARNING
CAUTION
NOTICE
Safety Summary
• Do not use this hoist or attached equipment for lifting, supporting, or transporting people or lifting or
supporting loads over people.
• The supporting structures and load-attaching devices used in conjunction with this hoist must provide
adequate support to handle all hoist operations plus the weight of the hoist and attached equipment. This is the
customer's responsibility. If in doubt, consult a registered structural engineer.
• Lifting equipment is subject to different regulations. These regulations may not be specified in this manual.
This manual has been produced by Ingersoll Rand to provide dealers, mechanics, operators and company personnel with
the information required to install and operate the products described herein. It is extremely important that mechanics and
operators be familiar with the servicing procedures of these products, or like or similar products, and are physically
capable of conducting the procedures. These personnel shall have a general working knowledge that includes:
• Proper and safe use and application of mechanics common hand tools as well as special Ingersoll Rand or
recommended tools.
• Safety procedures, precautions and work habits established by accepted industry standards.
Ingersoll Rand cannot know of, or provide all the procedures by which product operations or repairs may be conducted
and the hazards and/or results of each method. If operation or maintenance procedures not specifically recommended by
the manufacturer are conducted, it must be ensured that product safety is not endangered by the actions taken. If unsure of
an operation or maintenance procedure or step, personnel should place the product in a safe condition and contact
supervisors and/or the factory for technical assistance.

SAFETY INFORMATION

Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury or property damage.
Indicates information or a company policy that relates directly or indirectly to the safety
of personnel or protection of property.
WARNING
NOTICE
1