Transport, Storage And Handling; Conditions For Transporting The Machine; Unpacking/Assembly - TECO 100 Variant Manual De Instrucciones

TRANSPORT, STORAGE AND HANDLING

The tyre changer must be transported in its original packing and stowed in the position shown on
the external packing.
- Packing dimensions:
• width ..............................................................................................................................1310 mm
• depth .............................................................................................................................1540 mm
• height .............................................................................................................................2100 mm
- Weight of the machine with wooden packing:
• STANDARD version ........................................................................................................... kg 500
• FULL version ..................................................................................................................... kg 550
Ambient conditions for machine transport and storage
Temperature: -25° ÷ +55°C.
WARNING
Do not stack other goods on top of the packing to avoid damaging it.
To move the packing, insert the tines of a fork-lift truck into the slots on the base of the packing itself
(pallet) (1-fig. 1).
ATTENTION
Carry out the moving operations with great care, paying attention to move the packaged machine
only from the side clearly indicated on the packaging.
Failure to follow these recommendations may result in damage to the machine and put the operator's
safety at risk.
Before moving the machine, refer to the HOISTING/HANDLING section.
WARNING
Take utmost care when unpacking, assembling, hoisting and installing the machine as described
in this heading.
Keep the original packing in good conditions to be used if the equipment has to be shipped in the future.
Failure to comply with these instruction may damage the machine and risk the operator's safety.
Remove the top part of the cardboard packaging. Make sure that the machine has not been damaged
in transit.
Remove the upper part of the packing.
The machine is fully assembled, comprising 3 main groups: tyre changer, accessories, wheel lift (fig. 1a).
Identify the points at which the machine is anchored to the pallet and proceed to remove fixing
devices ( fig. 1a ).
User Manual TECO 100 Variant

Conditions for transporting the machine

UNPACKING/ASSEmBLY

Handling
31