Use of the Naída CI M90 sound processor next to or
•
stacked with other equipment should be avoided because
it could result in improper operation (e.g., poor sound
quality, cutouts in sound, delay in response when making
adjustments, or loss of lock). If such use is necessary,
the Naída CI M90 and the other equipment should be
observed to verify that they are operating normally.
Use of components, accessories, and cables other
•
than those specified in the Compatibility section of
this document could result in increased electromagnetic
emissions or decreased electromagnetic immunity of
this equipment and result in improper operation (e.g.,
poor sound quality, cutouts in sound, delay in response
when making adjustments, or loss of lock).
•
Portable RF communications equipment (including
devices such as antenna cables and external antennas)
should be used no closer than 12 inches (30 cm) to any
part of the Naída CI M90 sound processor, including the
headpiece cable. Decreased performance of the sound
processor, headpiece, or other accessories could result
(e.g., poor sound quality, cutouts in sound, delay in
response when making adjustments, or loss of lock).
The Naída CI M90 sound processors and accessories
•
should be used in accordance with the electromagnetic
compatibility information provided in the Guidance and
Manufacturer's Declaration section of this document.
Although electromagnetic emissions of your Naída CI
•
M90 sound processor have been confirmed within safe
limits, some other devices could be sensitive to such
emissions. If you notice other devices do not behave
6