Connection To An Audio System - Marantz DV6400 Manual Del Usuario

HOOK UPS
The following show examples of connections commonly used to connect the DVD player either TV and other
components.
If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround or DTS surround format, the
DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL AUDIO OUT
jacks. 5.1 channel Dolby Digital Surround sound and DTS sound can also be output from the 5.1 CH OUTPUT
jacks. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic
ambience with powerful and high-quality surround sound of a professional standard, which can be heard in
movie theaters. Use an audio coaxial or optical digital cable (not included) for the audio connections. Use audio
cables (commercially available ) for the 5.1 CH audio connection.
Notes
¡Be sure to turn off the power to all components in the system before connecting another component.
¡Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the
DVD player.

Connection to an audio system

Method 1
Audio Input Jacks
AUDIO
Analog Audio Out
DVD
• Method 1 DVD Player + Stereo system
• Method 2 DVD Player + Dolby Digital decoder or DTS decoder
NOTES
• If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to ON for audio output in the setup
mode. (See page 26)
• If output DTS audio, connect to a DTS decoder, and set DTS to "DTS" for audio output in the setup mode. (See page 26)
• Unless connected to a Dolby Digital decoder or a DTS decoder, set Dolby Digital to "OFF", or DTS to "PCM" for audio output in
the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
(See page 26)
• The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or
DAT deck.
• Set Dolby Digital "OFF" and set DTS to "PCM" for audio output in the setup mode for method 1 only. Playing a DVD using incor-
rect settings may generate noise distortion, and may also damage the speakers. (Refer to page 26 to set Dolby Digital "ON"
and to set DTS to "DTS")
• Super Audio CD sound is not output from the 2ch AUDIO OUT jacks.
• Super Audio CD sound is not output as digital sound.
Optical cable (not supplied)
• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diame-
ter of 15 cm or more when storing them.
• Use a cable which is 3m or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.
Stereo system
– 13 –
Method 2
Dolby Digital decoder
Digital Audio Input
Jacks
Digital Audio Out
or
DTS decoder
EN