Marker Setup Screen; Black Level Setting; Virtual Surround - Marantz DV6400 Manual Del Usuario

PLAYING A DISC
You can check information about the current disc by pressing
the DISPLAY button on the remote control.
1
Press the DISPLAY button during playback to show cur-
rent Track.
• The elapsed and remaining playing time of the current
track will be displayed.
2 Press the DISPLAY button again to show current
Group.
• The elapsed and remaining playing time of the current
group will be displayed.
3 Press the DISPLAY button for
the third time.
• The BIT RATE and the current
repeat setting will be displayed.
• If you are playing a dual layered
disc, the layer number will also
be displayed ( L0: Layer 0 is
playing. L1: Layer 1 is playing).
4
Press the DISPLAY button for the fourth time to
remove the display.
Hints for the On-Screen Display
• C - indicates Chapter repeat
• T - indicates Title or Track repeat
• G - indicates Group (folder) repeat
• A - indicates Disc repeat
• A B- indicates A-B repeat

Marker Setup Screen

DVD-A DVD-V
Use markers to memorise
your favourite places on a disc.
1
Press the SEARCH MODE
button four times (CD, Super
Audio CD, VCD: three times)
during playback.
• The display screen and Markers
will appear on the TV screen.
2 Press the s or B button to select 1, 2, 3, 4, 5, 6,
7, 8, 9, or 10 and ensure that "- : - - : - -" appears
in the display.
3 When reaches the desired point, press the ENTER
button.
• The Title or Track and elapsed playing time will appear
in the TV screen.
4 To return to the Marker later, press the SEARCH
MODE button four times (CD, Super Audio CD,
VCD: three times) during playback and the s or B
button to choose the desired marker, then press
the ENTER button.
NOTES:
• Opening the disc tray or turning off the power or select
2
AC at step and press the ENTER button will erase
all Markers.
• To clear a marker, using the s or B button, position
the cursor on to the marker number to be cleared and
press the CLEAR button.
• You can mark up to 10 points.
5 Press the SEARCH MODE or RETURN button to
exit.
DVD-A
IIII
T
SUPER
CD VCD
AUDIO CD

Black Level Setting

Adjust the Black Level Settings to make
the black parts of the picture as bright as you preferred.
1 Press the MODE button during playback.
2 Press the ENTER button to switch ON/OFF.
ON (Default) : Makes the dark
parts brighter.
OFF : Shows the original pic-
ture as recorded.
3 Press the MODE or RETURN
button to exit.

Virtual Surround

You can enjoy stereophonic visual
space on your existing 2 channel
stereo system.
1
Press the MODE button twice
during playback.
2 Press the ENTER button to set it 1(Natural effect),
2(Emphasized effect) or OFF.
3
Press the RETURN button to exit.
1
Press the MODE button during playback.
2 Press the ENTER button to set 1(Natural effect),
2(Emphasized effect) or OFF.
3
Press the RETURN button to exit.
NOTES
:
• Select Virtual Surround OFF or adjust the volume down
if the sound is distorted.
• When 5.1CH is selected as the audio channel in the
audio setting of the setup menu, Virtual Surround does
not function. Details are on page 26.
• The Virtual Surround setting is not available for Super Audio
CDs. (It may be possible to use the Virtual Surround setting
when playing back discs that include a CD area.)
– 24 –
DVD-A DVD-V
ON
DVD-A DVD-V
CD MP3
VCD
VCD
WMA
EN