COZY W255GPPR Instrucciones De Instalación Y Funcionamiento página 19

WARNING: Please Use Caution While Installing the Electrical Connection
FOLLOW THIS STEP IF THE PILOT PRO
IS ON THE LEFT SIDE OF THE HOUSING.
(Go back to step 7-A if the Pilot Pro is on the right side of the housing).
Make certain wiring connections are tight before proceeding and secured so they
will not be able to contact high temperature locations.
STEP 7-B.
A. Route the wires around the back edge and inside the heater
A
housing. Bundle wires neatly with a cable tie (48) attached to
the Z-shaped bracket inside the liner.
B. Lead the bundle of wires through the gap between the valve
B
and valve bracket.
Do not allow the bundled wires to hang beyond the edge of
the valve bracket (C) and keep the bundled wires below the
lower part of the burner (D).
NOTE: Keep all wires away from the burner.
A
ELECTRICAL CONNECTION
48
C
Page 19
D
C
50 B
48
...continue to page 20.
1018454-E