Battery Level; Range Extender Spares - Orbea Rise Manual Tecnico

70 | ORBEA

BATTERY LEVEL

COMBINED BATTERY LEVEL
(INTERNAL BATTERY AND RANGE EXTENDER)
When a Range Extender is connected to Rise, the system
calculates the total capacity of both the Range Extender
and the internal battery (612 Wh) and the remaining
battery level information for the system will take into
account the charge left on both batteries out of the total
612 Wh capacity.
The combined battery charge level will be visible on the
EW-EN100 juntion, the SC-EN800 display or the Orbea
Read the Checking the Battery Level section on Use of
Rise chapter of this manual to learn more about the diffe-
rent ways of checking the battery level on Rise.
EXAMPLES:
BATTERY CHARGE SYSTEM CHARGE
BATTERY
LEVEL LEVEL
RS internal
50% (180Wh)
battery (360Wh)
50%
(306 Wh of 612 Wh)
Range Extender
50% (126 Wh)
(252 Wh)
BATTERY CHARGE SYSTEM CHARGE
BATTERY
LEVEL LEVEL
RS internal
100% (360Wh)
battery (360Wh)
79%
(486 Wh of 612 Wh)
Range Extender
50% (126 Wh)
(252 Wh)
TECHNICAL MANUAL
STANDALONE RANGE EXTENDER
BATTERY LEVEL
Read the Checking the Battery Level section on Use
of Rise chapter of this manual to learn more about the
different ways of checking the battery level on Rise.
CHARGING THE RANGE EXTENDER
Read the Charging the Batteries section on Use of Rise
chapter of this manual to learn about the charging proce-
dure of the Range Extender and the internal battery.
Read the Relevant Information about the
RS Batteries section of this manual to know
more about the care, use and troubleshoo-
ting procedures of the Range Extender and
the internal battery.
BLUE PAPER RISE · 2021

RANGE EXTENDER SPARES

37
41.1
41.2
Always use the original washers to install a bottle holder or the Range Extender mount to Rise.
37
RS RANGE EXTENDER BATTERY 252 WH
ART Nº: Y022
Includes the Range Extender battery all all necessary components to install the RE on Rise.
· RS Range Extender battery 252Wh
· RE chargin point tab
· RE downtube mount
· Rubber protectors
38 RANGE EXTENDER DOWNTUBE MOUNT
Compatible with standard bottles
ART Nº: X2230000
38.1 RANGE EXTENDER DOWNTUBE MOUNT
38.2 FRAME RUBBER PROTECTOR
38.3 M5x10 BOLT
38.4 SAFETY O-RING 40x3.5
4 0
RANGE EXTENDER CONNECTION CABLE
ART Nº: X2250000
RANGE EXTENDER CONNECTION CABLE
38.4 / 39
38.3
When installing the Range
38.1 Extender holder, remove the
four washers pre-installed on the
frame and make sure that,
once installed, the Range
Extender´s six contact points
rest correctly against the
downtube.
38.2
Always follow the recommended
torque settings.
40
· RE connection cable
· Safety o-ring
39 SAFETY O-RING KIT
QTY. ART Nº: X2240000
1 39.1 SAFETY O-RING 40x3.5
6
2
1
41
RANGE EXTENDER CHARGE POINT TA B
QTY. ART Nº: CONTACT ORBEA
1
41.1 RANGE EXTENDER CHARGE POINT TAB
41.2 BOLT M2x8
Do not remove or manipulate the Range Extender charge point tab.
Doing so may damage the battery and void the warranty. If the tab
needs replacing, contact Orbea.
ORBEA | 71
EN
QTY.
4
QTY.
1
4