Fijacion Coberturas, Centralita Y Proteccion Pies Rav 1400 A - Ap - Ravaglioli RAV 1400 A Manual Del Usuario

Elevador electrohidráulico
Tabla de contenido

Publicidad

5.11
FISSAGGIO COPERTURE, CENTRALINA E SALVAPIEDI RAV 1400 A - AP
• Rif. Fig. 22 - Montare i salvapiedi (1) sulla pedana (2). Posizionare la copertura (3) (solo per RAV 1400 A) e il supporto centralina (4) (solo per
RAV 1400 A). Utilizzando i fori come dime, forare con una punta di 9 mm ad una profondità di 50 mm e fissare la copertura con tasselli (5) in
dotazione (vedi fig. 21).
5.11
SECURING COVERS, CONTROL UNIT AND TOE GUARD RAV 1400 A - AP
• Ref. Fig. 22 - Fit the toe guards (1) to the platform (2). Place the cover (3) and the control unit support (4) (for RAV 1400 A only). Use the holes
as templates and drill holes with a 9 mm bit to a depth of 50 mm. Secure the cover using the anchors (5) supplied (see fig. 21).
5.11
BEFESTIGUNG DER ABDECKUNGEN, ZENTRALE UND DES FUSSSCHUTZES RAV 1400 A - AP
• Zu Abb. 22 - Die Fußschutzvorrichtungen (1) an der Fahrschiene (5) montieren. Die Abdeckung (3) (nur bei der RAV 1400 A) und den Ständer
der Zentrale (3) (nur bei der RAV 1400A) ausrichten. Indem man die Löcher als Schablonen verwendet, mit einem 9 mm Bohrer auf eine Tiefe
von 50 mm aufbohren. Die Abdeckung nun mit den mitgelieferten Dübeln (5) befestigen (siehe Abb. 21).
5.11
FIXATION COUVERTURES, CENTRALE ET PROTECTIONS DES PIEDS RAV 1400 A - AP
• Réf. Fig. 22 - Installer les protections des pieds (1) sur le chemin de roulement (2). Mettre la couverture (3) (seulement pour RAV 1400 A) et
le support de la centrale (4) (seulement pour RAV 1400 A) dans la bonne position. En utilisant les trous comme gabarit, percer avec une mèche
de diamètre 9 à une profondeur de 50 mm et fixer la couverture à l'aide des chevilles (5) fournies (voir fig. 21).
5.11

FIJACION COBERTURAS, CENTRALITA Y PROTECCION PIES RAV 1400 A - AP

• Ref. Fig. 22 - Montar la protección pies (1) en la tarima (2). Posicionar la cobertura (3) (solo para RAV 1400 A) y el soporte centralita (4) (solo
para RAV 1400 A). Utilizando los agujeros como dimas, perforar con una punta de 9 mm y una profundidad de 50 mm. Fijar la cobertura con
los tacos (5) suministrados en dotación (ver fig. 21).
RAV 1400 A - RAV 1400 AP
RAV 1400 B - RAV 1400 BP
0576-M001-0
5
31

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rav 1400 apRav 1400 bRav 1400 bp

Tabla de contenido