During The Operation - Bowa NightKNIFE Manual De Instrucciones

5.2.
MN031-447-S1 EN
MN031-447-S0-20101217-EN
1. Connect the HF cable D to the HF device and switch on Connect the HF cable C3 to the HF device and switch on
the HF device. the HF device.
2. Set the output power of the HF device.
3. Perform a thorough visual inspection and functional test
each time before using the ligation instrument (see
section 7.6, page 44).
The jaws A1 are open in the initial state.
4. Using the handle C, close the jaws A1.
5. Insert the jaw insert A in the trocar sleeve.

During the operation

WARNING
Risk of patient injury due to incorrect device settings
and limited visibility!
Set the output power of the HF device to the value
necessary for the operation.
Use only approved programs (see section 8, page 51).
Carry out operations only with adequate visibility.
WARNING
Risk of patient injury due to hot electrode surfaces and
vapor emission!
Maintain sufficient distance between the tips of the
instrument and sensitive tissue structures, such as the
pancreas or intestine.
Ensure that hot ligation instruments are not used for
preparation.
Do not lay the ligation instrument on the patient.
Using visual control, insert the ligation instrument into
the patient's body.
NightKNIFE / Ligator
5 Operation
23