Bowa NightKNIFE Manual De Instrucciones página 95

MN031-447-S1 EN
MN031-447-S0-20101217-EN
Shank tube
NOTE
Risk of material damage to shank tube from metal
brushes!
Use only the plastic brushes supplied with the
instrument to clean the shank tube.
If necessary, use a steam sprayer for cleaning.
1
1. Use the small cleaning brush to clean the inside of the
proximal end 3 of the shank tube.
2. Use the large cleaning brush to clean the inside of the
distal end 1 of the shank tube.
3. Rinse the distal end of the shank tube B with fully
demineralized water or distilled water to clean the inside
of the housing. At the same time, actuate the trigger 2 to
clean the actuation mechanism inside the housing.
NightKNIFE / Ligator
7 Preparation
2 3
39