Service, Maintenance And Care - diversey TASKI swingo XP-R Manual De Instrucciones

Service, maintenance and care

The maintenance of the machine is a prerequisite for impec-
cable operation and a long service life.
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will ex-
pire.
Attention:
In order to rule out unintended machine
functions, before starting maintenance
works the following must always be carried
out
- the machine must be switched off,
- the key removed and
- the emergency stop confirmed.
Legend:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service lamp
Activity
Loading batteries
Replenishing distilled water (wet-cell
batteries). Observe the service sheet of
the battery supplier!
Draining and cleaning the recovery and
fresh water tank (Flextank)
Check the intake and suction filter for
contaminations and clean them
Clean all yellow marked parts
Clean the brushes
Clean the squeegee, check the blades
for wear and change them, if necessary ●
Wipe the machine using a damp cloth
Clean the seals of the tank lid, check
them for cracks and replace them, if
necessary
Check parking brake and emergency
stop button
Maintenance and service program car-
ried out by Diversey service techni-
cians
Service intervals
TASKI machines are high-quality machines that have been
checked for safety in the factory and by authorized inspectors.
Electrical and mechanical parts are subject to wear and aging
after a longer period of use.
Service center
Please always indicate the type and number of the machine
whenever you contact us for order placing or in case of mal-
functions.
The required data are provided on the nameplate of your ma-
chine. The address of your closest TASKI service partner is
provided on the last page of these instructions of use.
Blade replacement
● 95
● 96 7
8
● 102
●
●
• Undo the four socket screws (1, 2, 3, 4).
● 102
• Separate the squeegee body from the squeegee core (5,
6).
101
• Remove the blades (7, 8).
• Clean the squeegee body and both squeegee cores under
● 102
running water.
• Mount the "turned" or new blades onto the squeegee core.
●
• Reinsert the squeegee core into the squeegee body.
• Retighten the four socket screws.
● 96
●
• In order to maintain operational safety and
readiness for use, the machine must be ser-
viced whenever the maintenance indicator
lights up (factory setting is 650 working
hours) or at least once a year.
1
2
5
6
EN
3
4
103