User's manual
Visit our web site to download the operating instructions for your instrument:
www.chauvin-arnoux.com
Search on the name of your instrument. When you have found the instrument, go to its page. The operating
instructions are on the right. Download them.
Inserting the battery
E27 clamp
1
Mobile jaw.
2
Fixed jaw.
3
Arrow indicating the direction of current flow.
4
Guard
5
Mobile arm.
6
Reset button.
7
ON and OL indicators.
8
Three-position slide switch.
9
Male BNC connector.
10
Type B micro-USB connector for external power supply.
11
Battery compartment cover.
12
Screw of the battery compartment cover.
13
Fixed arm.
Indicators and controls
Three-position slide switch:
OFF: instrument off
10mV/A: 100A range.
100mV/A: 10A range.
ON indicator
Off: instrument off
Lighted green: instrument on
Blinking green: the batteries will have to be replaced in less than 4h.
Lighted orange: permanent operation (auto off deactivated)
OL indicator
Off: the measurement is correct
Lighted red: the measurement exceeds the range
Lighted red for 3 seconds: the zero adjustment is in progress.
Zero adjustment button
Adjust the zero before each measurement by pressing this button.
5
EN