Registering Your Product; Important Information - Tekview PowertxtDuo Manual Del Usuario

IMPORTANT INFORMATION

4

Registering Your Product

Powertxt Duo® has a 12/24 month (depending on your country) return to base
warranty. To receive this warranty your product must be registered within 30
days of purchase, to ensure your warranty is activated and valid should you need
technical assistance please go to the web address below to register your product;
http://estateview.tekview-solutions.com/warranties/register
Important Information
Thank you for purchasing the Powertxt Duo®. Powertxt Duo® is a remote
controlled power device that uses a sIM card and the GsM network. Powertxt
Duo® has two relays allowing the user to control the power to two devices
independently. Powertxt Duo® is designed to control electrical devices (e.g.
routers, switches etc) for business use up to 10 amps total (5 amps total per
device). Three cables with the required fittings are supplied with this product
(2 for the devices and 1 for the power supply).
Please note this is a professional information technology product and only "trained
service personnel" should insert or remove the sIM card inside Powertxt Duo® or
access any internal components as there are hazardous voltages inside (i.e.
someone who has the appropriate technical training and experience necessary to
be aware of the hazards to which that person may be exposed in performing a task
and of measures to minimize the risks to that person or other persons).
We operate a policy of continuous development and therefore we reserve the
right to make changes and improvements to the design, functionality or any
part of this product as described in this document without prior notice. For the
latest information please contact Tekview limited. We cannot be held
responsible in anyway should this product be used other than for the intended
purpose. every effort has been taken to ensure the accuracy of this document
however we accept no responsibility for any damage, injury, loss or expense
resulting from errors or omissions whether consequential or indirectly and
however caused due to the use of this product.
When sending a command to the Powertxt Duo® device you will always receive
an sMs back (network dependent), if any other number tries to send the
Powertxt Duo® device a message it will not reply with an sMs.
every command includes your chosen 4 digit numeric password for security.
The power loss notification is automatically On and alerts are always sent when
the power is lost or restored (network dependent).
all services and functions of this product need to be supported by the
GsM network and a sIM card.
• The sIM card mobile/cell number is referred to as the mobile number
in this manual
• Before using this product check that mobile phones can be used in
the area
• We recommend before choosing your network provider you check the
network signal strength where you intend to use the product to make
sure it is sufficient
• Be sure to keep the password and mobile number safe and do not
disclose this information to anyone other than the authorised users
in order to ensure there is no misuse
• a sIM card is required for use in this product, we recommend using a
M2M (Machine 2 Machine) sIM card but if a PaYG (Pay as you go) sIM
card is used please ensure that the sIM card has credit at all times for
this product to be effective
• The password must be a 4 digit number
• The maximum digits that are allowed for the mobile number is sixteen
• This device will reply to each sMs command that is sent to it
(network dependent)
• The # symbol must not be ignored when typing an sMs command
• Do not include any spaces within the commands
• should this device not function as detailed in this instruction book,
please contact your supplier for technical support
• The power loss / restore feature is automatically enabled
• The password must be entered in every command for security
• Please MaKe a nOTe OF THe PassWOrD – THIs PrODUCT neeDs
THe PassWOrD TO OPeraTe
• Please KeeP THe PassWOrD saFe
5