Shockwave Medical Lithoplasty 825D Manual Del Operador página 30

Electromagnetic Compatibility Guidance – Separation Distances
Recommended separation distances between portable and mobile RF communications equipment and the Model 825D
The Generator Model 825D is intended for use in an electromagnetic environment in which radiated RF disturbances are
controlled. The customer or the user of the Generator Model 825D can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the Generator
Model 825D as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output power
of transmitter
(W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m) can
be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of
the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection
from structures, objects and people.
Essential Performance
Generator Model 825D maintains safe and effective performance in the delivery of Lithoplasty therapy when
operated in the electromagnetic environment specified in the table above.
LBL 60780 rev. B
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz
0.12
0.37
1.17
3.69
11.67
80 MHz to 800 MHz
0.12
0.37
1.17
3.69
11.67
EN
800 MHz to 2,5 GHz
0.23
0.74
2.33
7.38
23.33
30 | P a g e