10. After cleaning, reassemble the Ultra Cooker lid by
replacing the plastic gasket holder and silicone gasket.
Start by pressing the clean gasket holder into the lid. Turn
counter clockwise so that the 6 grips are positioned over
ponge.
the plastic tabs. This will ensure the holder is secure. The
arrows on the plastic gasket holder point toward the pot
lid at
away from the lid. (See Fig. 14)
n cloth
11. The silicone gasket has a narrow top, a channel for the holder, and a wide bottom that
fits into the lid. (See Fig. 15). Press the clean gasket into the lid so that the holder fits
securely into the gasket's channel.
IMPORTANT:
positioned with the wide bottom into the underside of the
lid. If the gasket is not assembled properly, the Ultra
Cooker will not operate. An alarm will sound and the error
"E3" will be displayed. To correct, remove the silicone
gasket, reverse and replace.
12. When necessary, gently pull the water collector
downwards to remove from the back of the unit. Discard
maged,
any water that may collect after each use. Rinse and
arts
replace the water collector before the next use.
the
13. Wipe the base clean with a damp soft cloth or sponge. Do not pour any liquid into the
Ultra Cooker's interior base and do not wet the plug outlet on the base. Do not wet the
Ultra Cooker control panel.
oned
up and
14. Never use harsh chemical detergents, scouring pads or abrasive powders on any of the
parts or components.
oughly.
15. In order to maintain optimal performance of your Ultra Cooker, the heating plate inside
minate
must be free of dirt, food or residue. If necessary, wipe with a soft, damp cloth and be
sure to dry thoroughly.
oil
16. To prevent aromas, molds and off flavors, never store your Ultra Cooker closed with the
lid locked in place. Pack and store the Ultra Cooker with the lid resting upside-down
on the removable cooking pot.
the
ckage.
17. Store the Ultra Cooker in a cool, dry place.
e rod's
up and
The silicone gasket must always be properly
FIG. 14
FIG. 15
15