Final Installation - Luminance Brands Kathy Ireland LK66W Serie El Manual Del Propietario

4.1
Place the Glass Shade into the opening of the LED
Light Fixture Assembly, aligning the Three Flat Areas
on the top edge of the Glass Shade with the LED Light
Fixture Assembly Three Raised Dimples .
Turn the Glass Shade Clockwise until it stops to secure
the Glass Shade into the LED Light Fixture Assembly
(Figure 9) .
NOTE: Periodically check that the Glass Shade
is seated fully clockwise in the LED Light Fixture
Assembly.
4.2
Cut the 3-Speed Fan Switch Pull Chain and LED Light
Fixture Pull Chain to a desired length (optional) .
Install Coupling / Chain / Fob onto Light Fixture Pull
Chain (supplied with Light Fixture) (Figure 10) .
Install Coupling / Chain / Fob onto Ceiling Fan Speed
Switch Pull Chain (supplied with Switch Housing)
(Figure 10) .

4. Final Installation

LED LIGHT
FIXTURE
ASSEMBLY
RAISED
DIMPLES (3)
Figure 9
Figure 10
8
TURN GLASS SHADE CLOCKWISE
FAN SWITCH PULL
CHAIN/COUPLING/FOB
LED LIGHT FIXTURE PULL
CHAIN/COUPLING/FOB
U.L. Model No.: LK66 & LK66W
GLASS
SHADE FLAT
AREAS (3)