Final Assembly - Luminance Brands Kathy Ireland Home CF244LGRT00 El Manual Del Propietario

6.1
Screw the two Threaded Studs (supplied) into the
tapped holes in the Hanger Bracket (Figure 22) .
6.2
Lift the Ceiling Cover up to the Threaded Studs and
turn until Studs protrude through the holes in the
Ceiling Cover (Figure 23) .
Secure the Ceiling Cover in place by sliding
Lockwashers over the Threaded Studs and installing
the two Knurled Knobs (supplied) . (Figure 23) .
Tighten the Knurled Knobs securely until the Ceiling
Cover fits snugly against the ceiling and the hole in the
Ceiling Cover is clear of the Downrod .
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
CEILING COVER & RECEIVER NOT SHOWN FOR CLARITY.
THREADED
STUDS (2)
Figure 22
1-1/4"
THREADED
STUD (2)
#8 EXTERNAL
TOOTH
LOCKWASHER (2)
Figure 23
14
CEILING
COVER
#8-32 KNURLED
KNOB (2)
U.L. Model No.: CF244L & CF252L