Unpacking; General Set Up - Shop-Vac EA Serie Manual Del Usuario

UNPACKING WITH FOLD DOWN HANDLE
(not standard with all models)
NOTE: ACCESSORIES AND FILTERS MAY BE PACKED IN TANK.
1. Lift fold down handle into upright position and lock in place.
2. To return handle to down position, push locked tabs to unlock position (unlocked
symbol). Lower handle.
Note: handle must be in upright and in locked position to unlock lid latches.
3. Pull lid latches out from bottom, lift up on bottom of latch and bring down to side of
tank.
4. Lift cover off of tank by using the handle on top of the cover.
5. Remove any accessories and literature that may have been packed in the vacuum
tank.
1. Before replacing tank cover, refer to Dry Pick Up or Wet Pick Up Operation in user manual to ensure
you have the proper filters installed for your cleaning operation.
2. Replace the tank cover. Lift latches up and place in the grooves on the cover. Push in
on bottom of latches to lock in place.
3. Insert machine hose end with locking-nut into inlet of tank. Turn locking nut to tighten. Do not
over-tighten.
4. Attach the extension wands to the accessory end of the hose. Twist slightly to tighten
the connection.

GENERAL SET UP

PAGE 5