Getting Started; Attaching Or Changing The Accessory Head - Vorwerk Kobold VB100 Manual De Instrucciones

2

Getting started

In this chapter, you will learn how to set up your Kobold
VB100 Cordless Vacuum Cleaner. You will
get to know the basic functions of your cordless
vacuum cleaner and how to use it properly.
Your cordless vacuum cleaner is supplied with the battery
and premium filter bag already inserted. Before you can
start, you must attach the Kobold EBB100 Electric Brush
(see chapter "2.1 Attaching or changing the accessory
head" on page 14) and fully charge the battery (see
chapter "2.3 Charging the Kobold VB100 Cordless Vac-
uum Cleaner" on page 16).
When you first receive your cordless vacuum
cleaner, the transport mode is activated. You will
need to charge your device before you can switch it
on for the first time (chapter "2.3 Charging the Kobold
VB100 Cordless Vacuum Cleaner" on page 16).
2.1 Attaching or changing the
accessory head
For cleaning floors, you use the Kobold VB100
Cordless Vacuum Cleaner in combination with the Kob-
old EBB100 Electric Brush.
1. Connect the attachment socket
vacuum cleaner to the pivot on the electric brush
2. Make sure you hear the attachment socket click into
the pivot.
3. To remove the electric brush from the cordless vacu-
um cleaner, press the button
tom of the suction piece.
Once it is unlocked, you can remove the electric
brush from the cordless vacuum cleaner.
14
of the cordless
.
located at the bot-