2.3
Charging the Kobold VB100
Cordless Vacuum Cleaner
The Kobold VB100 Cordless Vacuum Cleaner is
not fully charged on delivery. It must therefore be
charged prior to initial use. This may take around
three hours.
To charge your cordless vacuum cleaner, proceed as fol-
lows:
1. Put the cordless vacuum cleaner into the standby
position (see chapter "2.2 Standby position and po-
wer setting" on page 15).
2. Connect the AC charger
3. Note the prescribed voltage of 220-240 V.
4. Connect the AC charger to the charging point on the
cordless vacuum cleaner
5. Ensure that the plug is fully inserted.
You can also charge the battery pack separately.
For more information on this, see chapter "Charging
the removed battery pack" on page 34.
16
to the power supply.
.