Installation On Luminance Brands Fans Having A Modular Switch Housing With Center Screw - Luminance Brands Kathy Ireland Home LK65 Serie El Manual Del Propietario

4. Installation on Luminance Brands Fans Having a
Modular Switch Housing with Center Screw
4.1
Disconnect Electrical Power to the Branch Circuit at
the Circuit Breaker Panel or Main Fuse Box before
attempting to install the Ceiling Fan Light Fixture .
4.2
Remove the Switch Housing from the Cover Plate by
removing the Three Screws around the side of the
Switch Housing (Figure 3) .
Retain the Three Screws for future use in Step 4 .9 .
4.3
Disconnect the Motor Connector from the Switch
Housing Connector (Figure 4) .
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box or circuit breaker panel before
wiring. All wiring must be in accordance with National
and Local codes and the ceiling fan must be properly
grounded as a precaution against possible electrical
shock.
SWITCH HOUSING
SCREWS (3)
Figure 3
MOTOR
CONNECTOR
SWITCH
HOUSING
Figure 4
5
WARNING
COVER
PLATE
SWITCH
HOUSING
SWITCH
HOUSING
CONNECTOR
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: LK65
COVER
PLATE