Final Installation - Luminance Brands Kathy Ireland Home LK65 Serie El Manual Del Propietario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6.1
Place the Glass Bowl into the bottom of the Light
Fixture Assembly . Align the Glass Bowl Threads (3)
with the Light Fixture Assembly Dimples (3), located
inside the Fixture Plate (Figure 20) .
Then turn the Glass Bowl Clockwise until it stops .
NOTE: Periodically check that the glass bowl is
seated fully clockwise in the light fitter plate.
6.2
Connect the Pendant (supplied with fan) to the Fan
Speed Control Chain by sliding the Pendant (small hole
first) up onto the Fan Speed Control Chain (Figure 21) .
Then attach the Coupling (supplied with fan) to the end
of the Fan Speed Control Chain and allow the Pendant
to fall down over the Coupling (Figure 21) .
Attach the Coupling End of the Coupling, Chain and
Pendant Assembly (supplied with light fixture) to the
LED Light Fixture Assembly Control Chain (Figure 21) .

6. Final Installation

GLASS BOWL
THREADS (3)
Figure 20
Figure 21
14
LIGHT FIXTURE
ASSEMBLY
DIMPLES (3)
LIGHT FIXTURE
ASSEMBLY INTERIOR
GLASS BOWL
U.L. Model No.: LK65

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido