Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
READ CAREFULLY BEFORE USING.
Switch on
Plug in the adapter, the home page will be activated and show
Stop, Manual, Program, H.R.C. and Race.
Function buttons
RECOVERY
Press this button for recovery function after
exercising, while the LCD is still active.The
computer will run a time down for 60 se
conds, after which your recovery rate will be
displayed,grades 1 up to 6. Level 1 featuring
fast recovery, level 6 slow recovery.
Chestbelt compulsary !
RESET
Press to clear last data entry.
Hold for 3 seconds to reset the display.
START/STOP Press to start, pause or stop training session
ENTER
Press to confirm Program Selection or Para
meter Settings.
▲▼
To set values for time, calories, count and
distance.
Press for program selection.
Display Functions
TIME
Training time.
TIME/500M
Average 500 meter time.
DISTANCE
Distance.
CALORIES
Calorieburn.
STROKES
Current strokes.
SPM
Strokes per minute.
PULSE
Current heart rate.
Let's get started
Training in MANUAL MODE
Select Manual via ▲▼ and confirm with enter.
•
Use ▲▼ to load level 'L', confirm selection by pressing
enter.
•
Time flashes: use ▲▼ to set exercise time, confirm selec-
tion by pressing enter. If you donot intend setting exercise
time, simply press enter.
•
Distance flashes: use ▲▼ to set distance, confirm selec-
tion by pressing enter. If you donot intend setting exercise
distance, simply press enter.
•
Calories flashes: use ▲▼ to set calorie consumption,
confirm selection by pressing 'enter'. If you donot intend
setting calorie consumption, simply press enter.
•
Pulse flashes: use ▲▼ to set maximum heart rate,
confirm selection by pressing enter. If you donot intend
setting a heart rate level, simply press enter, the monitor
will display current heart rate value.
•
Start exercising by pressing st/stop.
Training in PROGRAM MODE
Select P1-12 (program) via ▲▼ and confirm with enter.
•
Set target value for level, time, distance, calories and
pulse.
•
If you donot intend setting any target value, start exer-
cising by pressing st/stop.
Training in USER MODE
Select User to set up your own profile.
•
Set loadsettings for each segment via ▲▼ and confirm
with enter.
•
Press enter again for 2 seconds and set target value for
level, time, distance, calories and pulse.
•
If you donot intend setting any target value, start exer-
cising by pressing st/stop.
•
Start exercising by pressing st/stop.
Training in HRC. MODE
Select HRC and use ▲▼ to set your age, confirm with enter.
•
Select 55%, 75%, 90% or TAG.
•
In TAG you may preset your target heart rate value via
▲▼. Confirm with enter.
•
Set target value for level, time, distance, calories and
pulse.
•
If you donot intend setting any target value, start exer-
cising by pressing st/stop.
•
Upon entering rate in Bpm (Beats per minute) the load
tension will be controlled by current heart rate.
•
The resistance will be auto-adjusted according to current
heart rate figure. If your heart rate figure is under the tar-
get pulse, the tension will be up-adjusted one level every
30 seconds, up to the maximum level 16.
•
As soon as your heart rate figure has achieved the target
pulse, tension will be down adjusted one level imme-
diately.
Publicidad
Tabla de contenido
