GYS SPOT LIFT EASY Manual Del Usuario página 18

Translation of the original notice
manufacturer.
ales Description Jusqu'à 3
Mécanique ±0.05
ciage: Ra 25 Fraisage: Ra 3.2
In order to facilitate the maintenance process you can access the inside of the column by following the steps below.
1.
nérales Description
-F Mécanique
Sciage: Ra 25
2.
Proceed in reverse order to reassemble the column.
Masse: 82209.35 g
18
Surface:
Clean the SPOT LIFT EASY at least once a week to remove all dust and dirt that could
degrade the proper functioning of the product in the long term. Use wipes designed
for cleaning painted surfaces. Do not use any water, flammable or corrosive liquids.
Visually inspect your SPOT LIFT EASY before each use.
Jusqu'à 6 Jusqu'à 30
±0.05
To disconnect the hydraulic quick coupling make sure that the fork of the SPOT LIFT
Tournage: Ra 1.6
EASY is fully lowered. Otherwise there will be hydraulic leakage when disconnecting.
If you feel significant resistance when trying to disconnect the hydraulic coupling, it
means that pressure is still present. Press «RELEASE» on the pump to make sure there
is no more pressure and that the fork is lowered.
Jusqu'à 3 Jusqu'à 6
±0.05 ±0.05
Fraisage: Ra 3.2 Tournage: Ra 1.6
Do not use the Spot Lift Easy without replacing the rear case and the top plate with
the screws.
Traitement: (Code ST Gys)
SPOT LIFT EASY
Jusqu'à 120
±0.1 ±0.15
Casser les angles: 0.2 x0.2
Jusqu'à 30 Jusqu'à 120
±0.1 ±0.15
Casser les angles: 0.2 x0.2
- Unscrew the two screws on top of the column and remove the top
plate.
- Remove the rear case by lifting it up slightly and then pulling it
towards you.
Plan de Contôle
Date modification: Modifié par:
25/06/2020
Etabli par: Sébastien COIGNARD
Date: 10/04/2019
Statut:
PROTOTYPE
Jusqu'à 400 Jusqu'à 1000
±0.2 ±0.3
Jusqu'à 400 Jusqu'à 1000
±0.2 ±0.3
sebastienco
A4
Format :
EN