General Description - GYS GYSFLASH 9.24 Manual Del Usuario

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

Connection / disconnection :

• Ensure that the charger is not connected to the mains before

connecting or disconnecting clamps to the battery terminals

• Always ensure the Red clamp is connected to the «+» battery

terminal first. If it is necessary to connect the black clamp to the

vehicle chassis, make sure it is a safe distance from the battery and

the fuel line. The charger must then be plugged into the mains.

• After charging, disconnect the charger from the mains, then

disconnect the negative clamp from the body of the car and then

disconnect the positive clamp from the battery, in this order.

Connection :

• Class II device

• The connection to the power supply must be carried out in

compliance with national standards.

Maintenance:

• If the power supply cable is damaged, it must be replaced by the

manufacturer, its service agent or an equally qualified person.

• Maintenance should only be carried out by a qualified person.

• Warning ! Always disconnect from the mains before performing

maintenance on the device.

• Do not use solvents or any agressive cleaning products.

• Clean the device's surfaces with a dry cloth.

Regulations :

• The Machine is compliant with European directives.

• The declaration of conformity is available on our website.

• EAEC Conformity marking (Eurasian Economic Community).

• Equipment in compliance with British requirements. The British

Declaration of Conformity is available on our website (see home

page).

• Equipment in conformity with Moroccan standards.

• The declaration C‫( م‬CMIM) of conformity is available on our

website (see cover page).

Waste management:

• This product should be disposed of at an appropriate recycling

facility. Do not throw away in a household bin.