Apex iX Fit Manual De Instrucciones página 11

iX Fit / English
3. Installation
3.1 Unpacking
To secure its contents inside, the iX Fit CPAP device and accessories are bundled in a paper-packaged
box. Unpack this box by removing the device and its accessory and checking for any damage, which
may have occurred during shipping. If there are damages, please contact your dealer immediately.
3.2 Setting Up
3.2.1 Using device only
3.2.2 Using with humidifier (Optional)
Place the device below head height on a stable level
surface. Plug the power connector into the rear of the
device. Connect one end of the power cord into the power
supply unit and the other end into the power outlet.
Warning: Do not place the device above head height
to prevent water from entering the breathing tube
Connect the Light grey tubing firmly to the air outlet located on
the side of the device.
Connect the free end of the air tubing firmly onto the assembled
mask. See the mask user guide for detailed information.
Recommended
www.apexmedicalcorp.com
masks are
8
available on