Apex iX Fit Manual De Instrucciones página 13

iX Fit / English
3.2.3 Disconnecting accessories – Humidifier and Light grey tubing
After assembling th humidifier with the device, the user can
connect the Light grey tubing with the rotatable air outlet
located on the top of the humidifier.
Note: Heated tubing is not supported on iX Fit device.
Plug the power connector into the rear of the device. Connect
one end of the power cord into the power supply unit and the
other end into the power outlet.
Connect the free end of the air tubing firmly onto the assembled
mask. See the mask user guide for detailed information.
Recommended
www.apexmedicalcorp.com
Humidifier
Slightly press the release button on the humidifier, and the
device will disconnect from humidifier. Now you can
horizontally pull the device away from the humidifier.
Warning: Always empty the water inside the water
chamber of humidifier after every usage.
Note: To avoid damage, please do not forcefully disconnect the
device without pressing the release button.
Light grey tubing
Tubing could be horizontally removed from the device by
holding both sides of the cuff.
Note: To avoid damage, please do not hold the conjunction
area between the tubing and cuff when removing the tubing.
masks are
10
available on