Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
24" Minimum
TOP OF VEHICLE
Cequent Performance Products, Inc.
Plymouth, MI 48170
Technical Service: (888) 521-0510
Installation Instructions
Hull-Hauler™ Watercraft Carrier | Product Code: 59913
Using Hex Wrench (I), screw the
Clamp Knobs (G) onto the Cap
Screws (H) until snug, but do not
tighten down.
Repeat steps 2 - 6 for securing all
four Hull-Hugger Saddles to the
crossbars—two on the front crossbar
and two on the rear crossbar.
Ensure that your crossbars are a
minimum 24" apart from each other
(the further apart, the more stable
your watercraft will be).
Align the Saddles, making sure the
placement is the same on the front and
rear crossbars. Once aligned, SECURE
ALL FOUR SADDLES COMPLETELY
by tightening the clamp knobs.
Page 4 of 9
5
6
7
8
59913N
Rev A
3/15
Publicidad
Tabla de contenido
