Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Cequent Performance Products, Inc.
Plymouth, MI 48170
Technical Service: (888) 521-0510
Installation Instructions
Hull-Hauler™ Watercraft Carrier | Product Code: 59913
Position the Saddles on the front crossbar
so they are angled toward each other.
Repeat for the Saddles on the rear
crossbar.
Load the watercraft.
Once loaded, check to make sure all
four saddles are cradling the watercraft,
then tighten the pivot knobs on each
saddle to secure.
Feed the Cam Buckle Strap (C)
through the Cam Buckle Cover (B),
leaving the cam buckle exposed at
the end.
Feed the Cam Buckle Strap (C) under the
front crossbar, knot as shown, then
hang both ends of the strap up and over
the watercraft.
DO NOT LOOP STRAP THROUGH
SADDLES - ATTACH CAM BUCKLE
STRAPS TO CROSSBARS ONLY.
Page 5 of 9
9
10
11
12
59913N
Rev A
3/15
Publicidad
Tabla de contenido
