Recharge The Fuel; User Training - Ravelli RBH 150 V Manual De Uso Y Mantenimiento

⚠

Recharge the fuel

⚠
Use only wood pellets, the characteristics shown in this manual.
During pellet loading prevent the pellet bag from coming into contact with hot surfaces.
��
It is not recommended to empty the pellet bag directly into the hopper to avoid depositing wood sawdust on the bottom of
the hopper.
Recharge by extracting the fireplace
To load the pellets inside the hopper, proceed as described below:
step
1 Turn off the fireplace and wait for it to cool completely
2 Extract the fireplace (follow the steps shown in the paragraph "How to extract the fireplace")
3 Pour the pellets into the hopper
4 Reinsert the fireplace, making sure the locking mechanism engages.
⚠
You can hear when coupling occurs, as it makes a "clicking" sound.
Before extracting the fireplace and loading the pellets, make sure that the fireplace is off and completely cold.
Recharge with loading kit and / or from the opening of the chimney cladding
To load the pellets inside the hopper, proceed as described below:
step
Pour the pellets into the hopper, through the loading kit or directly from the opening.
1
If the loading kit is not used, be careful that the pellets do not fall out of the hopper.

User training

Once installation is complete, the user must always be fully trained in the functions and characteristics of the stove by the technician
authorized by Ravelli to ensure optimal and safe use.
The training should cover the following topics:
• Description of the stove, its operation and basic settings
• How to turn the stove on and off safely
• Fuel storage and refilling
• What to do in the event of an alarm, in particular that of "no ignition"
• How to clean the stove correctly and the importance of performing it on a regular basis
• It is advisable to schedule the first annual maintenance
Use and maintenance manual RBH 150 V - RBH 200 V
EN
Rev.2 15/07/2021
Pag.25