Using Narrow And Wide Blades - Nogueira FTN-1000 G3 Manua De Instrucciones

4. Preparation

USING NARROW AND WIDE BLADES

Two narrow blades and one wide blade are mounted
on each feeding drum. This is the factory default
setting. Your Harvester is delivered with the blades
already assembled this way.
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
Wearing PPE (Personal Protective
Equipment) is mandatory
HOW TO MOUNT THE BLADES:
Start the assembly by the right feeding
1.
drum.
Assemble a wide blade in the position
2.
indicated in the picture to the side.
On the same feeding drum, mount two
3.
more narrow blades.
With your hands, turn the feeding drum
4.
until the wide blade is in the position
58
1 Wide
Blade
until the wide blade is in
Instructions Manual
RIGHT
2 Narrow
Blades
Turn the feeding drums
this position
LEFT