Nogueira FTN-1000 G3 Manua De Instrucciones página 214

8. Practical Guide
The machine does not gather the crop.
Probable cause
Broken safety pin(s).
Tractor below the minimum
recommended power.
Incorrect PTO speed.
Bad or uneven cut.
Probable cause
Dull rotor knives.
Worn rotor counter knife.
Rotor knives detached from
counter knife.
Low production.
Probable cause
Inconstant work speed.
Bad forage wagon transport
logistic or organization.
Inadequate tractor.
Improper ground for mechanized
harvesting.
102
Replace the safety pin(s).
Use a tractor with the recommended
power.
Use a speed of 540 rpm.
Sharpen the knives.
Turn over the knife or replace it.
Adjust the spacing between knives
and counter knife.
Try to keep your work speed as
constant as possible.
Organize the positioning and shifting
from forage wagons.
Use a tractor with adequate power.
Cultivate on proper ground.
Instructions Manual
Solution
Solution
Solution