Disconnecting Hoses; Uncoupling The Machine From The Tractor; Clearing (Unclogging) - Nogueira FTN-1000 G3 Manua De Instrucciones

5.8 - Disconnecting hoses

Before disconnecting the hydraulic hoses
1.
from the tractor valves, it is necessary to
relieve the system pressure. To do this, turn
off the tractor and then repeatedly push
the levers, easing the system.
With the tractor remote control levers in
2.
the neutral position, pull the hoses quickly:
disconnection will occur with minimal
loss of oil.
Then, reinsert all the protective caps (A)
3.
into the hose couplings and the tractor
valves.

5.9 - Uncoupling the machine from the tractor

Choose a flat location to uncouple the machine from the tractor.
Be aware when performing this procedure there is a risk of personal injury.
ƒ Turn off the power take off;
ƒ Park the machine on a level and sturdy ground;
ƒ Engage the tractor's parking brake;
ƒ Lower the machine to the ground;
ƒ Turn off the tractor engine;
ƒ Disconnect the hydraulic hoses (as instructed in the previous item);
ƒ Remove the cardan shaft;
ƒ Disengage the tractor machine.

5.10 - Clearing (unclogging)

In case of obstruction (clogging) of the machine, unplug the power take-
off and tractor engine immediately.
DANGER!
Make sure the tractor engine is turned off
and the key has been removed from the
ignition before unclogging the machine.
Never approach the drums without being
sure that the tractor engine is off and the
machine without any movement.
A
Instructions Manual
5. Operation
65