Nogueira FTN-1000 G3 Manua De Instrucciones página 200

6. Maintenance
Remove the bottom (R);
7.
Using the pin punch found in the
8.
machine toolbox, remove the safety pin
(P) that is broken;
NOTE: the broken pin is located in the biggest
gear's shaft.
Install a new safety pin;
9.
Using a compression punch, crimp
10.
the pins' ends so that they are tightly-
mounted;
After changing the pin, replace the
11.
bottom (R), the cutting gears, the
sprocket wheels (J) and (K) and the chain
(G);
Stretch the chain (G);
12.
Replace the cover (E).
13.
NOTE!
In addition to conventional pins, 5
special safety pins, more resistant,
are provided along with the machine.
If the safety pin is breaking easily, use
the special pins. In this case, replace
the two pins.
Be aware of the sprocket wheels
alignment. Observe the quantity and
position of the shim washers (T).
Replace them when mounting the
sprocket again.
Misaligned sprocket wheels damage
the chain and compromise the
machine.
88
Conventional
T
Instructions Manual
L
R
P
P
Pin
Special
Pin
It has a hole in the tip