Br95 Applications; Normal Weighing Mode; Equipment Configuration; First Calibration - Baxtran BR95 Manual De Instrucciones

6. BR95 APPLICATIONS

6.1 NORMAL WEIGHING MODE

6.1.1 EQUIPMENT CONFIGURATION

6.1.2 FIRST CALIBRATION

6.1.3 USE

6.2 MODE COMPTEUSE

6.2.1 EQUIPMENT CONFIGURATION
6.2.2 FIRST CALIBRATION
6.2.3 USE
6.3 LIMITS AND ALARM
6.4 UNIT RANGE/ MULTI RANGE/ MULTI INTERVAL
6.1 NORMAL WEIGHING MODE
6.1.1 CONFIGURATION OF THE EQUIPMENT
See section LF2 of the technical parameters
6.1.2 FIRST CALIBRATION
See section LF1 of the technical parameters
6.1.3 USE
Switch on the equipment when all the parameters have been correctly configured and the equipment has been calibrated
• Make sure than the value of the indicator, without load on the platform, is 0. If this is not the case, press
• Place the weight on the platform and the platform will show the weight.
• The accumulation and sending of data will depend on the mode chosen in the section UF-6
• You can display the accumulated values at any time by pressing
6.2 PIECE COUNTING MODE
6.2.1 CONFIGURATION OF THE EQUIPMENT
See section LF2 of the technical parameters
6.2.2 FIRST CALIBRATION
See section LF1 of the technical parameters
6.2.3 USE
Switch on the equipment when all the parameters have been correctly configured. Make sure that the value on the visor, with no load on the
platform, is 0. If this is not the case press the key

STEPS TO FOLLOW;

1. Press the key
2. Press the key
C50/C100/C200.
3. Place the sample on the platform, and wait until the sign of stability and press the key
4. Place the product on the platform and the screen will show the number of pieces.
The accumulation and the sending of data will depend on the mode chosen in the section UF-6.
• To turn to the normal weighing mode, press the key
• If the user wants to go back to the piece counting mode, using the same sample of reference, press the key
• If the user want to change the sample of reference, the user must repeat the steps described above.
6.3 LIMITS AND ALARM
34
.
until the symbol PCS appears on the screen
successively to choose the quantity of pieces of the sample. On the screen will appear, successively, C10/C20/
(TOTALIZING)
to select Kg again.
USER'S MANUAL BR95
.
.
again.
EN