Baxtran BR95 Manual De Instrucciones página 41

div 01
•Use
and go back to the menu LF2).
LF2
•Use
to exit from the menu and the scale will begin again automatically).
LINEAL CALIBRATION
Up to six steps of calibration W0 ~W6
Make sure that the plate of the scale is empty before starting the calibration.
Press the key for the first point of calibration.
The previous points of calibration will be removed and the message CLEAR is going to appear on the screen.
Press the key to proceed with the next point of calibration.
Press the key
Press the key to keep everything.
Press the key to finish the calibration and go back to the menu
DISPLAY
LF3
•Press the Key
matically
W0
•Press the Key
( press the key
• Place 1/3 of the maximum weight on the plate and press
W1
(press the key
W2
•Place 2/3 of the maximum weight on the plate and press
(press the key
W3
•Place the maximum weight on the plate and press the key
the key
and then to change the step. (Press the key
, and then
LF 3
to go back to the previous point of calibration.
DESCRIPTION AND SEQUENCE OF USE
to start or the key
to calibrate the zero.
to exit from the calibration and go back to the menu LF3)
to exit from the calibration and go back to the menu LF3)
to exit from the calibration and go back to the menu LF3)
to exit from the calibration and go back to the menu LF3)
To continue with the other configuration or press the key
LF3.
To exit the menu and the scale will start again auto-
to calibrate the full capacity. (press
USER'S MANUAL BR95
To exit from the configuration
to calibrate 2/3 th the capacity.
to calibrate 2/3 th the capacity.
EN
41