Tabla De Contenido; Packing - Dolmar LT-30 Manual De Empleo Y De Seguridad

Thank you for choosing a DOLMAR product!
We trust that you will be a satisfied customer. By choosing a
DOLMAR you have chosen one of the most advanced brush-
cutters.
With their two-stroke gasoline engines the LT-30, MS-30C and
MS-30U brushcutters can be used anywhere, and with their
fuel pump (primer) they are unusually easy to start. They cut
grass, weeds, brush - anything that needs to be cut off at
ground level. They're ideal for yardwork and greens keeping
and especially suitable for occasional use. They offer the lat-
est technology, ergonomic design and high ease of use at a
reasonable price.
Your new brushcutter features a DOLMAR engine with Nikasil
6-channel cylinder with computerised timing and maintenance-
free electronic ignition. This ensures optimum fuel use and
very low pollutant emissions, and meets the strict future US
exhaust standards. A new silencer design and complete en-
capsulation of the entire engine provide maximum noise re-
duction.
These machines are not suitable for professional or rental
use.
The following industrial property rights apply: US 512606,
EP 0696414, GBM 9412925.
Important:
To ensure your own safety and to get the maximum perform-
ance out of your DOLMAR brushcutter, we urge you to
read this Owner's and Safety Manual carefully before
putting the brushcutter into operation and to strictly ob-
serve all of the safety regulations. Failure to do so can
result in serious injury to the operator and / or bystanders!
2
Table of contents
Packing ................................................................................ 2
Delivery inventory .............................................................. 3
Explanation of symbols ..................................................... 3
SAFETY PRECAUTIONS
General precautions ........................................................ 4
Personal protective equipment ....................................... 4
Handling fuels / Refuelling .......................................... 4-5
Putting into operation ...................................................... 5
Kickback .......................................................................... 6
Working behavior / Method of working ........................... 6
Applications for cutting tools ........................................... 6
Transport and Storage ................................................ 6-7
Maintenance .................................................................... 7
First Aid ........................................................................... 7
Technical data ..................................................................... 8
Components ........................................................................ 8
PUTTING INTO OPERATION
Handle installation, MS-30 U .......................................... 9
Handle installation, MS-30 C .......................................... 9
Handle installation, LT-30 ............................................... 9
Mounting the cutter guard ............................................. 10
Mounting the 4-tooth star blade or
8-tooth eddy blade (MS-30 U, MS-30 C) ...................... 11
Installing the trimmer head (MS-30 U, MS-30 C) ......... 11
Installing the line cutter (MS-30 U, MS-30 C, LT-30) ....... 12
Lengthening the line ..................................................... 12
Replacing the line ......................................................... 12
Installing the trimmer head (LT-30) .............................. 13
Lengthening the line ..................................................... 13
Replacing the line ......................................................... 13
Fuel mixture / Refuelling ............................................... 14
Putting on the harness .................................................. 15
Balancing the brushcutter ............................................. 15
Start engine ................................................................... 16
Idle adjustment .............................................................. 16
REPAIR AND MAINTENANCE WORK
Instructions for maintenance ........................................ 17
Sharpening of cutting tools ........................................... 17
Cleaning the air filter ..................................................... 18
Replacing and inspecting the spark plug ...................... 18
Lubricating the gear box ............................................... 19
Service and maintenance ............................................. 19
Troubleshooting ............................................................... 19
Extract from the spare part list ....................................... 20
Service, spare parts and guarantee ......................... 20-21
Notes .................................................................................. 21
Service centres ................................................................. 62

Packing

Your DOLMAR brushcutter comes in a cardboard box to
protect it from shipping damage.
Cardboard is a raw material. We encourage you to re-use the
box or recycle it (waste paper).
RE Y
Page