Tap On Lens; Switching Between Operation Modes; Using The Clock - Oregon Scientific Tap On Pro Manual De Usuario

• Press and hold for 2 seconds.
on the display when the keypad lock is on.

TAP ON LENS

The tap on lens feature gives you easy access to 1 of 6
preset modes:
• Heart rate (HR)
• Stopwatch (STW)
• Smart Training Program (SMART)
• Calorie measurement (CAL)
• Lap timer (LAP)
• Time
To set the tap on lens preset mode:
1. In clock mode, press SET repeatedly until you reach the
tap on lens "ON" display.
2. Press and hold SET to enter the preset modes
selection.
3. Press ST / SP / + or MEM / LAP / - to select the preset
mode.
4. Press SET to confirm.
To use the tap on lens:
Simply tap on the lens and your preset mode will display for
10 seconds before returning to the previous screen.
will appear
appears when the tap on lens is activated and flashes
when the preset display is shown.

SWITCHING BETWEEN OPERATION MODES

Press MODE to switch between the 5 operation modes:
• Real-Time Clock
• Alarm Clock
• User Profile / Exercise Profile
• Timer - SMART TRAINING PROGRAM
• Stopwatch
The modes are described in the sections that follow.
NOTE You can run the SMART TRAINING PROGRAM or
stopwatch in the background as you access other modes.
The icon for the mode that is running will flash until you
switch back to that mode.

USING THE CLOCK

The real-time clock is the default display for the watch.
To set the real-time clock:
1. Press MODE to switch to Real-Time Clock Mode.
2. Press and hold SET until the first setting flashes.
6