CycleOps PRO 300PT Manual De La Consola página 19

Setup (Modes)
S
ETUP
TIME AND DATE
MODES
RETURN
MODE
Setup Modes 1
1) From [MAIN MENU] press [DOWN ARROW] to scroll
to through to [SETUP] and press [SELECT].
2) Press [SELECT] to enter [MODES].
19
SELECT
M
ODES
SLEEPTIME
COMP MODE
RECORD CNTR
LANGUAGE
BACKLIGHT
RESET
RETURN
MODE
Setup Modes 2
3) Press [SELECT] to enter [SLEEP TIME].
4) Press [UP ARROW] or [DOWN ARROW] to toggle between 1-9 (displayed in
minutes). This determines duration of time before the console goes to sleep
without input from the bike or a heart rate signal is detected. Press [SELECT] to
accept changes and reenter scrolling menu.
5) Press [DOWN ARROW] to scroll to [COMP MODE] and press [SELECT].
6) Press [DOWN ARROW] to toggle between [200E] or [PT300]. Select setting
depending CycleOps Indoor Cycle model you own. Press [SELECT] to accept
changes and reenter scrolling menu.
7) Press [DOWN ARROW] to scroll to [RECORD CNTR] and press [SELECT].
8) Press [DOWN ARROW] to toggle between [SPEED] and [HEART]. Press
[SELECT] to accept changes and reenter scrolling menu. This function sets
when the ride time clock auto starts and stops. In [SPEED] mode, the run time
clock will stop when speed reaches zero. In [HEART] mode, the run time clock
time will continue to record as long as heart rate signal is detected.
9) Press [DOWN ARROW] twice to scroll to [BACKLIGHT] and press [SELECT].
10) Press [DOWN ARROW] to select either [UI], [UI DATA] or [OFF]. This function
determines when the backlight will be illuminated. [UI] = User Interface (when
buttons are pushed), [UI DATA] = User Interface and Data input, [OFF] =
Backlight is never illuminated. Press [SELECT] to accept changes and reenter
scrolling menu. NOTE: Use of backlight will reduce battery life.
11) To reset user settings select press [DOWN ARROW] and press [SELECT].
12) Press [DOWN ARROW] to scroll to [RETURN] and press [SELECT] to return to
[MAIN MENU].
PT300
SPEED
ENGLISH
UI
SELECT