CycleOps PRO 300PT Manual De La Consola página 22

RF Interference
If during use you are experiencing wireless drop out this is due to frequency interference. Wireless Internet access points, microwaves, cordless phones,
or other wireless devices may cause frequency interference. To mitigate the chance of interference set wireless access points to the lowest channel possi-
ble, and keep bikes away for interfering devices. To change the channel on your access point, please consult your manufacturers documentation or your
technology staff.
Glossary
Heart Rate (HR) - This displays current HR. Max/Avg values are displayed if Max or Avg is selected. Note that a non-coded chest strap or a CycleOps 2.4
Chest strap must be used in order for the console to pick up HR.
Watts - Real-time display of the effort you are putting in to pedaling the bike. This is your power reading. **If you press the select button while the cursor
is pointing to Watts the line changes to "inch-lbs". This is the raw torque value that is being applied to the hub, NOT your power in watts.
**Zones - If you choose to train in HR or power Zone mode, the corresponding zone for your given output will be displayed. See "Setting up Zones"
**Adjusting parameters of the tachometer - The "H" stands for "High" This part of the display is included to give you a visual interpretation of how hard
you are working compared to a fixed wattage value. You can change the maximum value by toggling the cursor to the "H" and pressing select. You can
change the high values between 400, 600, 800 or 1000 watts.
ANAR TH (AT) = Anaerobic Threshold = the point at which the demands of exercise can no longer be met by available aerobic sources and at which an
increase in anaerobic metabolism occurs and is demonstrated by an increase in blood lactate concentration.
Arrows = the "up" and "down" D located on the console
AVG = Average
Cadence (CAD) - The number of pedal revolutions per minute. The rate of pedaling is shown from 0 to 140 RPM.
Cursor = the ® arrow located on console screen
KPH = Kilometers Per Hour
MAX = Max
Metrics = a standard of measurement
MPH = Miles Per Hour
Scroll = to move vertically through available menu or screen options
Speed - The estimated speed that you would be traveling on a flat road with no wind is displayed here.
Toggle = to move horizontally through alphanumeric digits
UI = User Interface
Saris Cycling Group
5253 Verona Road
Madison, WI53711
800.783.7257
608.274.6550
16105G 08/08
22