Auto Shut-Off; Cleaning & Maintenance - REVAMP Professional PROGLOSS STEAMCARE Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
IMPORTANT: A small amount of water may spray through the five small apertures on the
top ceramic plate when the straightener has just been turned on, if the steam settings
have been selected
On average, for a typical user, styling their hair for 30 minutes, the WATER TANK needs
to be refilled:
-
On a High steam setting: every 6 uses
-
On a Low steam setting: every 12 uses
Use the touch temperature control + and - buttons to select your desired temperature
manually. We recommend using a lower temperature to start.
The temperature lights flash until the select temperature LED light become static on
the temperature setting selected.
Working on one section at a time run the straightener through the entire length of
the hair from roots to ends, without stopping. Use a comb while straightening for even
straighter results.
Repeat this process all over the head, allowing hair to cool before combing through.
This is a very efficient product that doesn't require a lot of steam to be effective.
Please do not expect steam to be visible at all time.
After using the straighteners, switch off, unplug, place on your REVAMP heat resistant
mat and allow to cool before storing away.
For ease of storing, the straightener plates can be shut down together by using the
lock/unlock lever as show in the Features section.
Follow us on www.revamphair.com for the latest hair tips and advice.
Please note:
This is a very efficient product that doesn't require a lot of steam to be effective.
Please do not expect steam to be visible at all time.
This is a high-performance product, avoid frequent use to prevent hair damage.
Regular use of styling products may deteriorate the surface coating over time.
Do not scratch the surface of the product as this will deteriorate the effectiveness of
the coating.
While heating, during use and cooling, place on the REVAMP heat resistant mat. Only
hold unit at the end of the handle.
The product reaches a very high temperature during operation, please style with
caution when using. Make sure to keep away from the scalp and skin to avoid burns.

AUTO SHUT-OFF

This appliance has an automatic shut off feature for added safety. If the appliance is
switched on for more than 60 minutes continuously, then it will automatically switch off. If
you wish to continue using the appliance after this time, press the power button to switch
on. Use the temperature control to select your desired temperature.
This feature should not be considered as a substitute for 'OFF'. ALWAYS REMEMBER TO
SWITCH THE APPLIANCE OFF AND UNPLUG FROM THE MAINS WHEN NOT IN USE.
CLEANING & MAINTENANCE
IMPORTANT: Filtered water should be used to fill the water tank of your SteamCare
straightener.
Switch the appliance off, unplug from the mains and allow to cool fully before
cleaning.
Wipe over all surfaces using a soft damp cloth. Do not use harsh abrasives or cleaners.
Do not immerse the appliance in water or and other liquid.
Ensure all parts are dried thoroughly with a soft towel before reusing.
To prevent cord damage, do not wrap the cord around the appliance, always store the
cord loosely next to the appliance.
Store in a cool dry place.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

St-1600

Tabla de contenido