Home Decorators Collection 51528 Guía De Uso Y Cuidado página 8

Assembly - Standard Ceiling Mount (continued)
3
Assembling the fan
CAUTION: To ensure wobble-free operation and to avoid
damage to the fan, the downrod (B) and the setscrew
(GG) must be completely tightened
NOTE: This fan is equipped with a safety tab (FF). Should
the setscrew (GG) ever become loose while the fan is
running in reverse, the safety tab (FF) will engage and
stop the fan from falling.
□
Loosen, but do not remove, the setscrew (GG) on the collar
on top of the fan-motor assembly (E).
□
Install the downrod (B) by inserting it into the motor collar
(N), and turning it clockwise until it is tight.
□
Reinstall the setscrews (GG) turning clockwise until tight.
4
Installing the top glass housing
□
Remove the two screws (HH) pre-installed on the top of the
fan-motor assembly.
□
Carefully place the decorative glass housing (D) onto the fan
motor assembly.
□
Align the two screw holes in the decorative glass housing
(D) with the screw holes on the top of the fan motor
assembly and securing with the screws (HH) that were
removed in step 1.
□
With power off, install the four candelabra base bulbs (25-
Watt, Maximum included) (J) by screwing into the light bulb
sockets.
GG
J
8
B
N
FF
E
D
HH