Static Electricity - UFESA AP9000 Manual De Instrucciones

Ocultar thumbs Ver también para AP9000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SUGGESTION
Information on the product
and suggestions for its use
The vacuum cleaner is for household use only.
Periodically clean the wheels. The dirt which
accumulates on the wheel axis may cause
difficulties in the wheel movement.
Move the vacuum cleaner carefully on doorsteps
and uneven surfaces, not to cause an excessive
rippling of the water inside the tank. This might
lead to a slight water overflow.
Technical parameters
The type of the vacuum cleaner and the technical
parameters are indicated on the rating label. Mains
protection 16 A.
Does not interfere with radio and TV reception.
Does not require grounding
Vacuum cleaners meet the requirements of the applicable
norms.
The appliance is in conformity with the requirements of
the directives:
– Electrical equipment designed for use within specific
voltage limits (LVD) – 2006/95/EC.
– Electromagnetic compatibility (EMC) – 2004/108/EC.
Noise level: 85 dB(A).
The appliance was marked by a CE sign on the rating
label.

Static electricity

In the process of vacuuming of some surfaces in areas
of low air humidity the device may become electrically
charged. It is a natural phenomenon – it does not damage
the device, and it is not considered to be a fault. In order to
minimize the phenomenon, we recommend you to:
● discharge the device by touching metal items in the
room with the pipe,
● increase air humidity in the room,
● use widely available antistatic agents.
.
Appliance features
The AP9000 vacuum cleaner is intended to pick up
dirt from floors, carpets, ceramic tiles, slots in wood
paneling, skirting boards, heaters. The vacuum cleaner
is also used to vacuum furniture, curtains, to pick up
liquids and to wet clean tiles, floorings, carpets, fitted
carpets and upholstery.
Appliance elements
1
Handle
2
Container lid opening button
3
Combination brush fastening
4
Plug and cord
5
Accessory compartment
6
Pump operation indicator
7
Pump switch
8
ON/OFF button
9
Power adjustment button +/-
10
Power level indicator
11
Cord rewind button
12
Clogged air inlet indicator
13
Parquet brush
14
Combination brush with small item separator
15
Turbo brush
16
Small brush
17
Small nozzle
18
Crevice nozzle
19
Telescopic suction tube
20
Suction hose
21
Dry filtration module with SAFBAG dust bag
22
Water filter module (filtration unit + partition)
23
Cleaning liquid container
24
Spray unit – suction hose handle attachment
25
Large atomizing nozzle
26
Small atomizing nozzle
27
Water pick up nozzle
28
Rubber slat to the large atomizing nozzle
29
Washing set
30
Foam filter I
31
Foam filter II
32
Inlet filter
33
Motor filter
34
EPA outlet filter
A

Publicidad

Tabla de contenido
loading

Tabla de contenido