Safety instructions
When using the turbobrush observe the following safety
precautions:
DANGER! / WARNING!
Health hazard
●
Do not touch the rotating brush.
●
Do not touch power cords
of electrical devices with the
turbobrush. This may damage
insulation of these cords.
●
Do not allow children near the
working turbobrush.
●
Touching the rotating brush may
cause injury.
●
This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved. Children
shall not play with the appliance.
Cleaning and user maintenance
shall not be made by children
without supervision.
●
Never use the turbobrush to:
●
Polish floors.
●
Suck:
●
liquids,
●
wet or damp dust,
●
hot ash,
●
burning objects, such as
cigarettes, matches,
●
sharp and hard items, such
as: razors, pins, thumbtacks,
pieces of glass, etc.,
●
flour, cement, plaster, printer
or photocopier toner, etc.
CAUTION!
Not observance can result in
damage to possessions
●
During work the roller of the rotating brush or suction
inlet may get obstructed with rags, papers, etc.
SUGGESTION
Information on the product
and suggestions for its use
●
Turbobrush is equipped with wheels that prevent
damage in case of unintentional use on hard floor.
Product description
1
Regulator
2
Connector
3
Fastening hook
4
Wheels
5
Rotating brush
6
Turbine cover
Using the turbobrush
To avoid obstruction of rotating element
remove big rubbish from the cleaned
surface before cleaning.
● Switch the vacuum cleaner on.
● Set the regulator on the turbobrush body depending
on the height of carpet hair.
• Short hair carpet – move the regulator towards
the sign
.
• Long hair carpet – move the regulator towards
the sign
.
In order to use the vacuum cleaner with
the turbobrush safely, especially while
cleaning long hair carpets and animal
skins, it is recommended to test the suction
power of the turbobrush on a small area of the
cleaned surface.
K