To...
From the base
delete a
While a message is playing, press
message
dElETE
With the phone in standby,
delete all
press
messages
confirm.
play old
messages
press
stop playback
Press
Screening Your Calls
You can use the answering system for call screening. While the system
takes a message, you can listen on the base speaker (if you turn on
Screen)
or from a handset. Only one handset can screen calls at a time. If
another handset tries to screen calls, it beeps and returns to standby.
To...
hear the caller leaving
a message
answer the call
mute the call screen
without answering*
* If you mute the call screen, the system continues taking the message: it just
stops playing through the speaker.
Using the System While You're Away from Home
You can dial in to your answering system from any touch-tone phone.
Before you can use this feature, you must program a security code.
Programming a Security Code
With the phone in standby, open the menu; select
Security
Code. Use the number keypad to enter a two-digit security code
(01
to 99). Press
MEnu/sElEcT
Remember to make a note of your new security code!
Dialing In to Your System
1.
Call your phone number & wait until the system answers. (If the system
is turned off, it answers after 10 rings & sounds a series of beeps.)
.
dElETE
; press
dElETE
again to
After the system plays all new messages,
Play/sToP
again.
Play/sToP
.
From the base
Listen to the caller
over the speaker.
NA
Press
Play/sToP
.
when you're finished.
From a handset
While a message is
playing, select 4:Delete.
Not available.
select 2:Play.
Select 5:Stop.
Call
From a handset
Press
MEssagE/MuTE
.
Press
Talk/flash
.
Press
End
or return the
handset to the cradle.
Ans.
Setup, then select
1