Publicidad
Idiomas disponibles
Idiomas disponibles
Open the plastic plug of USB connector. Connect the
micro USB charging cable to any power source and the
USB connector of your earphone for charging. The
earphone LED turns to solid red during charging. It takes
about 1.5 hours for the charge. When the battery is fully
charged the Red LED turns off.
You can also use the wireless function during charging
but will extend the charging time.
When the battery is low, the LED flashes red. At the same
time the earphone also provides a low battery warning
tone.
Note:
It is strongly recommended fully charging for the first
use.Playtime varies according to volume level and audio
content.
Micro USB Charging Cable
Laptop for Power Supply
7. Pairing with Wireless Devices
7-1 Pairing the earphone with a computer
Before pairing the earphone with your computer, please
make sure your computer or laptop has the built-in
Wireless feature. If not, you must purchase a Wireless
dongle, preferably version 2.1 or above.
1. Make sure the earphone is off.
2. Start the Wireless program in the computer.
3. The "Search new device" screen will be displayed.
4. Do not place both devices more than one meter away
from each other.
5. Press and hold the power button on the earphone until
EN-3
Publicidad
