Publicidad
Idiomas disponibles
Idiomas disponibles
Decrease volume
Answer a call
End a call
Play media
Pause/restart
media playback
Skip to next track
Skip to previous
track
Pairing mode
Note:
- There will be a prompt tone when the volume reaches
the maximum level.
- You can only pair and connect one device every time.
To switch Wireless device, disconnect the earphone from
the current device (disable the Wireless feature) before
connecting to another.
11. Take Care Your Earphone
- Store the earphone with power off and in a dry
environment.
- If you don't use the earphone for a long period, charging
the battery every 2 months for 1-2 hours.
- Don't charge the battery beyond the rating.
- Keep the temperature at 0˚C-40˚C during charging.
- Don't put the earphone on combustible substances (bed
and carpet) during charging.
- Don't disassemble and replace the built-in battery on
yourself, this will cause damage the earphone.
- Use a dry cloth for cleaning if needed.
- Avoid dropping the earphone from high places or on
hard surfaces.
Press the volume down (-) button.
Press the function button once to answer
the call.
Press the function button once during
on-line call.
Press the function button
Press the function button
Long press next track (+) button.
Long press previous track (-) button.
Press and hold the function button to enter
pairing mode after sounding power on.
(LED flashes blue and red alternately when
entering the pairing mode.)
EN-6
Publicidad
