Description; Usage; Technical Data; Instructions And Warnings - SW-Stahl 10277L Manual De Instrucciones

1.

DESCRIPTION

The machine for assembling and disassembling shock
absorbers, model 10277L, is made up of a painted metal
tubular frame.
On this structure is mounted a pneumatic piston fixed at
the frame, its extension and compression allows the
compression and the release of the spring held by control
brackets.
2.

USAGE

The machine 10277L is a device for assembling and
dissasembling the shock absorbers of the cars. Every
different use is considered improper and illogical.
The manufacturer does
for possible damage caused by non-compliance with
instructions.
3.

TECHNICAL DATA

Air pressure
Power
Cylinder stroke
Dimensions
Machine weight
Small clamp
Big clamp
Vice
4.

INSTRUCTIONS AND WARNINGS

The usage of this machine model 10277L required a
particular attention.
Compressed springs can be potential dangers due to
force collected because of compression.
This machine must be used always with its specific frontal
protection mounted correctly on the frame.

4.1.1 Individual protection measures

Here under listed the individual protection measures
necessary to work with our product.
12
12
not assume responsibility
Min 6 bar, Max 10 bar
735 Kg (6 atm)
1.226 Kg (10 atm)
330 mm
520x300x1400 mm
68 Kg
Ø 78÷130 mm
(Weight 3,6 Kg)
Ø 125÷205 mm
(Weight 4,2 Kg)
Weight 3,7 Kg
Accident prevention
gloves
Anti prevention shoes
Protection glasses
Instructions Manual
4.1.2

Danger pictograms

The machine is equipped with pictograms that show
remaining risks and individual protection measures to be
used during working operations.
The pictograms are integral part of the product. In case of
loss, deterioration or illegibility, require the pictograms to
the constructor in order to substitute them immediately.
Replace the pictograms always in the same place where
they were removed following the above design.
5.

CARRIAGE - HANDLING

The machine weights Kg. 65. It is necessary to use a
trolley for handling and carriage.
Fix the package at the trolley through straps in order to
balance it.
Handle with care in order to avoid to upset and to make the
package of 650x400x1400 mm falling, causing danger both
for the person responsible of the handling and for the staff
near the spot.
6.

UNPACKING

The machine is packed in a cardboard box of 650x400x1400 mm
and closed by metal clips.
On the package there are arrows indicating how to handle the
box.
Lay down the package in order to unpack the machine.
1 0 2 7 7 L
10277L
13