Extraordinary Maintenance; Vice; Disassembling Using Vice; Assembling Using Vice - SW-Stahl 10277L Manual De Instrucciones

10277L

16. EXTRAORDINARY MAINTENANCE

Extraordinary maintenance operations are to be carried
out by qualified personnel; it is advisable to refer to
authorized dealers for repairing operations and original
spare parts.

17. VICE

17.1 Disassembling using - Vice
It is advisable to unlock the nuts of shock absorbers' cap
before using the machine 10277L in order to easy working
operations.
Some automotive manufacturers prescribes to unlock
the clamp nuts of the caps before dismounting the shock
absorbers from the car.
Block the strut of the shock absorber inside the vice in
order to center it on the machine (see fig. 6).
Put the small arms near the spring and insert the upper
vices in the first coil available.
After having found the right position of the spring on the
vice and after having adjusted the upper vices, block the
adjustable arms (fig.4) locking the screws behind the case
with the key supplied.
16
Compress the spring using the foot control lever only to
release the pressure that the spring it-self exert on the cap.
Remove the blocking cup form the shock absorber
unscrewing the nut. Discharge the compression of the
spring and replace the old shaft with the new one.
17.2 Assembling using - Vice
For assembling make the contrary operations of the
disassembling. Put the new spring in the same position
where the old one was. Press the foot control lever in
order to make the spring stuck to the blocking cap. Block the
cap to the shaft of the shock absorber screwing the proper
nut.
1
4
Now the shock absorber is mounted, use the
foot control lever to release completely the
spring, then move the arms on the outside
and remove the shock absorber now
reassembled thanks to the machine 10277L.
2
5
3
6
15
15